Seal Kit PAIR for Ford Steering Cylinders 555 655 755 + with.685" rods

Description

Seal Kit for Ford Backhoe steering Cylinders  .685″ rod OD x 1-1/2″ bore ID.  This kit contains enough seals for 2 cylinders. Fits many models. Similar to C5NN3N713A except these kits
do not
include the metal washers or the gland retaining ring that are included in the OEM kits, this kit contains only the seals & the rod wiper retaining ring.
Note: actual seal colors may vary.
Please check your chrome rod diameter, this kit is for the original .685″ rod
, it will not fit the .750″ rod aftermarket replacement cylinders, or the 20mm (.787″) newer Ford cylinders.
It is not uncommon for these cylinders to have been replaced with the newer style Ford 20mm (.787″) rod factory replacement cylinders. If you have the 20mm (.787″) rods you need a different kit,
click here for the 20mm rod kit
.
An additional identifying feature of these cylinders is that both hoses attach at the base end of the cylinder, there are no tubes welded on the outside of the cylinder, and at the rod end the gland has 3 small screws in the face of it (item 1 in illustration).
Kit contains 2 ea. of the following:
Rod wiper
Rod wiper retaining ring
Rod seal o-ring
Rod seal backup ring
Gland o-ring
Gland backup ring
Piston seal (2 piece teflon ring & o-ring)
Fits the following backhoe models with dual steering cylinders up to model year 1987:
550
555, 555A, 555A-XL, 555B
655, 655A
750
755, 755A
5500, 5550
6500
7500
If you don’t know your model year just send us your “Unit Code”  or “Production Code” number & we can decode it for you.
We are Fox Machine, Inc. of Norway ME USA, If you have any questions please
contact Dean at FoxKits seal kit store.
Never attempt to service a pressurized cylinder, or a cylinder connected to a load, never use air or hydraulic pressure to disassemble a cylinder. These are top quality aftermarket replacement parts, we are not affiliated with any equipment manufacturer.